Copper Powder 99.5% - 99.9%

Copper Powder 99.5% - 99.9%

  • $28.00


Very high purity, air atomized, hydrogen reduced ultra fine copper powder. Spherical particle. High conductivity. High Density.
HTS Code: 7406.10.0000
NMFC: 30743
CAS: 7440-50-8

Additional Description

Recommended for:

  • Thick and Thin Film pastes
  • Capacitor Chips
  • End cap Terminators
  • Conductive Inks, paints and pastes
  • Injection Molding
  • Electronics
  • Thermal management
  • EDM Electrodes
  • Thermal Sprays
  • Sintered alloys/ products
  • Brazing/ soldering paste

Typical Analysis:
Copper: 99.81%
Iron: 0.01%
Hydrogen Loss: 0.18%
Apparent Density: 4.89 g/cc
SIEVE ANALYSIS
+200 MESH: 0%
-200+325 MESH: 4.8%
-325 MESH: 95.2%

Note: Pure copper powders do not show continuity or conductivity by a multimeter. I think there are two reasons for that. One is the low voltage used for the test. The other is lots of air and weak contacts between the particles. They will show conductivity with higher voltage, when they are compacted and when they are mixed with some oil or resin to form a paste.